| Customization: | Available |
|---|---|
| Type: | Circular Sawing Machine |
| Track: | Linear |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | 65NC | 75NC | 100NC | 130NC | 150NC | 200NC | 230NC |
| Cutting Capacity | |||||||
| Round | 8~65mm | 8~72mm | 20~100mm | 35~130mm | 45~150mm | 60~200mm | 70~230mm |
| Rectangle | 8~56mm | 8~58mm | 20~76mm | 35~105mm | 45~110mm | 60~140mm | 70~160mm |
| Round Tube | 8~65mm | 8~72mm | 20~100mm | 35~130mm | 45~150mm | 60~200mm | 70~230mm |
| Rectangle Tube | 8~56mm | 8~58mm | 20~76mm | 35~105mm | 45~110mm | 60~140mm | 70~160mm |
| Head Spindle | |||||||
| TCT Superhard Circular Saw Blade | φ250~285mm, T2.0mm | φ250~285mm, T2.0mm | φ360mm, T2.6mm | φ425mm, T2.7mm | φ460mm, T2.7mm | φ560mm, T3.0mm | φ630mm, T3.5mm |
| Pin Hole and Aperture | 4xφ11xPCD63xφ32 | 4xφ11xPCD63xφ32 | 4xφ11xPCD90xφ40 | 4xφ11xPCD90xφ40 | 4xφ11xPCD90xφ50 | 4xφ11xPCD120xφ50 | 4xφ11xPCD120xφ50 |
| Spindle Motor | 7.5KW(10HP) | 7.5KW(10HP) | 11KW(15HP) | 11KW(15HP) | 15KW(20HP) | 30KW(40HP) | 37KW(50HP) |
| Spindle Speed | 20~200rpm | 20~200rpm | 20~160rpm | 20~140rpm | 20~120rpm | 30~90rpm | 40~60rpm |
| Cut Feed Mode | AC Servo Motor+Ball Screw /Swing Feed | 45° Feed | Horizontal Feed | ||||
| Main Clamp Way | Hydraulic Type/Vertical and Horizontal Clamping of Each Group | ||||||
| Saw Blade Debris Removal Device | Passive Round Wire Brush | Active Round Wire Brush | |||||
| Gear Gap Compensation Device | Through-type Magnetic Power Brake | ||||||
| Feeding Clamps | |||||||
| Feeding Drive Mode | AC Servo Motor+Ball Screw | ||||||
| Feeding Clamp Way | Hydraulic Clamped | ||||||
| The Material Front End Removes the Length | 10~99 (Optional) | ||||||
| Material Back-end Material Length | 65mm+α(α is not enough to cut the length of a workpiece | 80+α | 85+α | 85+α | 25+α | 85+α | |
| Single Feed Cut Length | 6~800mm | 6~800mm | 6~680mm | 6~680mm | 6~800mm | 6~600mm | 6~800mm |
| Automatic Feeding Device |
|||||||
| Allow the Length of Material | 2000~6000mm | ||||||
| Supply Mode | Preloading/Hydraulic Lifting | ||||||
| Hydraulic Device | |||||||
| Hydraulic Pump Type | Preloading/Hydraulic Lifting | ||||||
| Hydraulic Drive Motor | 2.25KW | 2.25KW | 2.25KW | 3.75KW | 3.75KW | 5.5KW | 7.5KW |
| Hydraulic System Rated Pressure | 7MPa | ||||||
| Hydraulic Oil Capacity | 90L | 90L | 120L | 120L | 120L | 150L | 200L |
| Cutting Fluid Cooling Device | |||||||
| Cutting Fluid Motor | 0.19KW | ||||||
| Weight & Size | |||||||
| Weight(Machine+Rack) | 2750kg | 2750kg | 3000kg | 4200kg | 5280kg | 6830kg | 7320kg |
| Size(LxW) | 7100x2200mm | 7100x2200mm | 6500x2450mm | 6850x2850mm | 7350x3450mm | 7120x3720mm | 7300x3910mm |
| Other Standard Equipment | |||||||
| Saw Blade Deflection Shock Device | Tungsten Carbide Parallel Block | ||||||
| Dispenser | Pneumatic, reciprocating | ||||||
| Automatic Centrialized Grease Lubrication System | Timely Quantitative Forced to the Oil | ||||||
| Tool Micro-lubrication System | Quasi-dry Intermittent Oil | ||||||
| Chip Conveyor | Chain Plate Type, Continuous or Intermittent Operation | ||||||
| LED Work Light | Waterproof and Dustproof | ||||||
| Optional Device | |||||||
| Electric Control Box Heat Exchanger | Closed High Efficiency Heat Exchange System | ||||||
| Centrifugal Oil Mist Recovery Machine | Multi-level Filtering, Energy Saving and Environmental | ||||||
| Cluster Feeding Device | The Whole Bundle of Materials, Long Material Cutting Preferred | ||||||
| Third Clamp | The Length of the Material 20+α (α is not enough to cut the length of a workpiece) | ||||||
| Hydraulic Wire Brush | Active Removal of Chips | ||||||
| Long Material to Undertake Device(Discharge Device) | Various Flexible Choice, including Automatic Palletizing Robot | ||||||
){kind=link}