HP series Door Hydraulic Press
The machine use rod tightening combination frame structure, with sufficient strength and rigidity;
The slider uses rail guide; machine and slider are welded steel, the material is Q235-A, using carbon dioxide gas shielded arc welding, the weld should be ground smooth, no weld slag and
streaming scars, remove inner stress after weld. Columns guideway using high-quality materials, the guide portion after quenching hardness of HRC50 or more, good wear resistance.
Tope beam, worktable, left and right columns, sliders use Q235-A welded, remove inner stress after weld.
Oil Cylinder
Solo cylinder structure which is disposed on the upper beam hole, cylinder block uses 45 # forged steel,
material uniformity. Plunger rod surface hardening hardness is HRC45-50. The cylinder finishing by high-precision machine tools, cylinder bore after refining process to increase surface hardness and wear resistance
Hydraulic System
(1)Hydraulic system adopts advanced cartridge valve integrated system, the valve big flow, anti-pollution, flexible control, reliable performance, easy maintenance. Pilot solenoid valves are made of high
quality products.
(2)Hydraulic system working pressure is 25MPa, the main valve should be two-way cartridge valves. Hydraulic system is with overload protection devices. Hydraulic piping system
design reasonable, piping arranged in an orderly and tidy, high and low pressure pipeline is obvious
color distinction.
Hydraulic piping system should be reliable sealing flange connection priority connections, piping
layout and tidy, and the use
of shock and vibration-resistant gauge pipe clamps, pipe phosphate processing, and then coated
with rust-resistant paint.
(3)How to work Fixed stroke and fixed pressure; hydraulic machine operation: adjust, single cycle,
jog on the mold and work with automatic feeding.
(4)Fuel tank is divided into two parts, oil zone and oil back zone. Tank is steel plate welded structure,
which is installed with the oil level gauge, air filter, etc., tank was after pickling, passivation and anti-rust treatment, with separate oil filtration devices, and enables filtering device blockage accident alarm.
Tank with oil level indication and oil level gauge (upper and lower) alarm device.
(5)Filling valve Description: filling valve is to provide the master cylinder to draw or drain oil.
Specification:
| Model |
capacity |
pressure |
piston travel/ table travel |
table size |
dimension |
hydraulic station |
N.W./ G.W. |
| KN |
MPA |
mm |
mm |
mm |
mm |
KG |
| HP-30 |
300 |
25 |
300/270 |
300x400 |
1230x550x1180 |
/ |
420/650 |
| HP-50 |
500 |
25 |
220/405 |
400x800 |
150x650x1950 |
/ |
980/1100 |
| HP-63 |
630 |
30 |
220/405 |
400x800 |
150x650x1950 |
/ |
1020/1500 |
| HP-100 |
1000 |
30 |
250/405 |
460x980 |
1840x750x2250 |
730x630x960 |
1220/1420 |
| HP-150 |
1500 |
42 |
250/405 |
460x980 |
1840x750x2250 |
730x630x960 |
1350/1750 |
| HP-200 |
2000 |
40 |
300/405 |
500x1000 |
1940x950x2350 |
900x800x1060 |
2200/2400 |
| HP-300 |
3000 |
42 |
300/405 |
700x1200 |
2100x950x2700 |
1100x800x1060 |
4200/4500 |
| HP-400 |
4000 |
42 |
300/405 |
900x1200 |
2300x1000x2900 |
1100x1200x1350 |
5500/5850 |
| HP-500 |
5000 |
45 |
300/405 |
900x1200 |
2300x1000x2900 |
1100x1200x1350 |
6500/6900 |
Audited Supplier 
){kind=link}